Service mode different

Manufacturer

Model

Chassis

Product

Mode

Enter

CT-2119

CTV

Test Mode

Simultaneous press + & – on local panel and then power on with main switch. Exit: POWER.

Allstar

3750

CTV

Hotel Mode

OFF: Select programm 38. Simultaneous press

(3 sec) STORE & CONTROL+ on local keyboard.

ON: Select programm 38. Simultaneous press

(3 sec) STORE & PROGRAM- on local

keyboard.

CTV 5502

10.3 90° MONO

CTV

Press UP & DOWN buttons together on tv’s

local control and then switch on. You will see

SERVICE MODE. Do not press any button,

just power off the set, then on.

CTV 5502

10.3 90° MONO

CTV

Service Mode

Press UP & DOWN buttons together on tv’s local control and then switch on.

CTV

Service Mode

Simultaneous press P+ & P- on local panel and then power on with main switch.

MM63-13VT

FM240.00

CTV

ATS

Press button P/C on RC and switch on TV with main switch.

MM63-13VT

FM240.00

CTV

Press button ‚i’ on RC and switch on TV with main switch.

ICC9

CTV

Service Mode

Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED

switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again. (WARNING: scart must be free.)

CT1412B

CTV

Service Mode

Press and hold P+ and P- on local panel, then switch on TV with main switch.

ICC9

CTV

Service Mode

Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED

switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again. (WARNING: scart must be free.)

TX92

CTV

Put TV into standby, then turn power off, then

turn power on whilst holding standby button on

remote and step through menus to `vol set` and

increase level to max.

STEREO PLUS

CTV

Service Mode

MUTE –> OK (M) –> TV

Controls: cursor buttons. Store: OK (M).

Exit: TV

MC-51B

CTV

Service Mode

Simultaneously press MENU, VOL-, PR- on the local panel.

STEREO 4876

Digivision

DIGI III 110°

CTV

Service Mode

Turn on ‚TV Internal Service Program’ switch on

the digital modul (SE on display). On RC: 1=U1

V SHIFT, 2=U2 V LIN DN, 3=U3 V LIN, 4=H1

H SHIFT, 5=H2 H AMP, 6=H3 EW AMP, 7=

C, 8=C1, 9=C2, 0=H4 EW TRAPEZ?

TV=MEMO, VOL+/-=ADJUST.

STEREO PLUS

CTV

Service Mode

MUTE –> OK (M) –> TV

Controls: cursor buttons. Store: OK (M).

Exit: TV

MC64

CTV

Service Mode

Simultaneous press OK on RC & local panel.

MC84

CTV

Service Mode

Simultaneous press OK on RC & local panel.

C9000

CTV

Simultaneous press CM on the RC & „Service”

key on the control panel. Select: MEM IN/OUT.

Adjust: VOL +/-. Store: X. Exit: TV.

C9000

CTV

Simultaneous press VT on the RC & „Service”

key on the control panel. Select: MEM IN/OUT.

Adjust: VOL +/-. Store: X. Exit: TV.

C9003

CTV

Service Mode

On the local control press function key five times

(indication „Service” will appear), afterwards

within a sec. press key „MEN” on the remote

control. Store: X. Exit: TV.

Q2200

CTV

Service Mode

Go to ‚SERVICE’ in menu and then quick press

‚MENU’ on the RC. Select: yellow cursors.

Adjust: +/-. Store: ‚X’. Exit: ‚TV’.

Manufacturer

Model

Chassis

Product

Mode

Enter

STEREO PLUS

CTV

Service Mode

MUTE –> OK (M) –> TV

Controls: cursor buttons. Store: OK (M).

Exit: TV

CT21M5E

CTV

Service Mode

Press S701 (on board) and button 9 (in 5s). Store: ‚0’. Exit: stand-by.

MON

Service Mode

Select DISPLAY MODE. Press PROCEED.

Press and hold RESET. Then simultaneous

press + & -. ‚Warning Entering Service Menu?’

appears. Press PROCEED for enter. Be

careful! You can damage a monitor!

6364, 7364

2B-F

CTV

Service Mode

Quick press: –\-, MENU, TV.

EUROSTEREO

CTV

Service Mode

In 1s press buttons ‚-/–‚, ‚MENU’, ‚TV’. Select:

PR+/-. Adjust: VOL+/-. Store: fill-dot-symbol

on RC (near ‚i’ button). Exit: ‚STANDBY’.

45H1-0 55Y2-0

63/7157 63/7177

STEREO PLUS

CTV

Service Mode

MUTE –> OK (M) –> TV

Controls: cursor buttons. Store: OK (M).

Exit: TV

STEREO PLUS

CTV

Service Mode

i –> M –> PROGR.

Controls: cursor buttons. Store: M.

Exit: TV

DC1

CTV

Service Mode

Switch to Standby. Switch off with the mains

switch. Press and hold red button on RC and

then switch on with the mains switch (cca 10s).

Select: numbers buttons. Adjust: +/-. Store:

red button. Exit: ‚MUTE’.

DC2

CTV

Service Mode

Switch to Standby. Switch off with the mains

switch. Press and hold red button on RC and

then switch on with the mains switch (cca 10s).

Select: numbers buttons. Adjust: +/-. Store:

red button. Exit: ‚MUTE’.

Color 3038

F15-03 110°

CTV

After replacement of the MDA2061 (IR73) the TV receiver acts as folows: a) All programme storages have stored Ch00. b) The indicator shows German function characters. c) PAL and SECAM EAST standard recepcion is possible

(not NTSC and/or SECAM WEST).

If required to change according to paragr. b and

c then switch off the set by the mains switch.

Press both buttons + and – for volume on TV

and simultaneously switch the set on with the

mains switch. Keep the two volume buttons

pressed until the display indicates Pr. After 8s

the display indicates __. Now the following

buttons can be presseed on the RC, thus

additional corresponding segments will be

illuminated: Button ‚1’ function symbols indicate

international display. Reversible to German

display with button ‚2’. Button ‚5’ additional

SECAM WEST and/or NTSC reception

(Multistandard). Reversible to Single Standard

with button ‚3’. Store: Stand-By.

ICC10

CTV

Service Mode

Switch to Stand By. Switch off with the mains

switch. Press and hold ‚VT’ on RC then switch

on with the mains switch.

Manufacturer

Model

Chassis

Product

Mode

Enter

ICC9

CTV

Service Mode

Switch off TV with RC (st-by). Switch off TV with

main switch. Wait a few sec till ST_BY LED

switch off. Simultaneous press blue button on

RC and switch on TV with main switch. Press

blue button again. (WARNING: scart must be

free.)

TV-100

CTV

Service Mode

Simultaneous press red & blue buttons on RC

then (in 5 sec.) simultaneously press P- & P+

on local keyboard. Commands: arrows. Store:

OK. Exit: TV.

EURO-1

CTV

Service Mode

In Sound-Menu Low-tone-regel to MAX and

High-tone-regel to MIN. Press VOL- on TV

and RESET on RC in some time. Select: red

and green buttons. Adjust: yellow and blue

buttons. Store: ‚STORE’. Exit: switch off.

EURO-2

CTV

Service Mode

In Sound-Menu Low-tone-regel to MAX and

High-tone-regel to MIN. Press ‚F’ button on TV.

Then press VOL- on TV and REVEAL on RC in

some time. Select: red and green buttons.

Adjust: yellow and blue buttons. Store:

‚STR’. Exit: ‚N’ on RC.

CTV

Hotel Mode

ON: Press simultaneously ‚OFF TIMER’ on RC

and ‚CH.UP’ local. OFF: Press simultaneously ‚OFF TIMER’ on RC

and ‚VOL-‚ local.

CTV

Service Mode

Simultaneously press ‚RECALL’ on RC and ‚VOL-‚ local. Exit: ‚NORMAL’ on RC.

ANUBIS B

CTV

Hotel Mode

ON: Set HOTEL ON in Service Menu. Select programm 38. Simultaneous press (3 sec)

INSTALL & P- on local keyboard. OFF: Set HOTEL OFF in Service Menu.

ANUBIS B

CTV

Service Mode

Simultaneously press VOL+ & P- on RC. Exit: STANDBY.

Anubis S

CTV

Hotel Mode

OFF: Select programm 38. Simultaneous press (3 sec) PR+ & VOL- on local keyboard.

ON: Select programm 38. Simultaneous press (3 sec) STORE & PR- on local keyboard.

L7.1A

CTV

Service Mode

With special service RC. Or short M25, M25 on board and then switch on TV. Exit: st-by.

L9.1

CTV

Hotel Mode

Select program 38 on the TV. Simultaneously

press the keys VOLUME- and VOLUME+ on

the keyboard of the TV and the OSD key of

the remote control.

L9H

CTV

Service Mode

This model also supports the 062596 sequence

followed by [MENU] (service default) or

[i+]/[OSD] (service mode).

MD1.2E

CTV

Service Mode

There is a small Service jumper to short on the

small signal PCB. When the TV is in this first

level service mode, you can go in the second

level service mode by pressing both MENU

and – keys on top of the TV at the same time.

There you can read much parameters and

proceed with most of the adjustments. In fact

this method let you use an ordinary Remote

control but you also need to open the back

cover. With the special service remote control,

a special code is sent to enter the service mode.

Manufacturer

Model

Chassis

Product

Mode

Enter

MG3.1E

CTV

Service Mode

Option 1: In the TV-set itself is a 3-pin connector

with which either SERVICE-DEFAULT or

SERVICE-MODE can be activated. This

connector is depicted 0356 (SERVICE-PINS)

on page K7 (TXT&CONTROL). Shorting pins 1-2

will activate SERVICE-MODE. Shorting pins 2-3

will activate SERVICE-DEFAULT. Option 2: Activate these modes using the remote control.

Obviously option 2 is the preferred method because the settings have to be changed using

a remote control anyway…. To activate

SERVICE-DEFAULT: Press 0 6 2 5 9 6 and then

the [menu] button. The message ?Service Default?

appears and channel ?SER T? will be selected.

This only sets some settings to a preset value

(color/brightness/volume and such). This mode

is primarily intended to be used when the non

volatile memory has been replaced. It is then

loaded with the default values. To activate

SERVICE-MODE: Press 0 6 2 5 9 6 and then

the [i+] button. After pressing 0 6 2 5 9 6 the

message ?Dealer? should have appeared.

Do not worry about the channel changing while

you press the numbers.

Service technicians have service mode using a spe

29PT9416

MG7.1

CTV

Service Mode

Use the standard remote control an key in a

special sequence 0 6 2 5 9 6 followed by

pressing the ‚MENU’ button. If the main menu

also appears with the service menu just press

‚MENU’ again to clear it. The other way is to

short the two service pins on the signal panel

(pins 2 and 3 of connector 0356). The advantage

of this last method is that all the software

protections are turned off.

Y6

CTV

Service Mode

Use the standard remote control an key in a

special sequence 0 6 2 5 9 6 followed by

pressing the ‚MENU’ button. If the main menu

also appears with the service menu just press

‚MENU’ again to clear it.

VR210/58

VCR

Without cassette. Press and hold SYSTEM till

‚G591’ appears. Press and hold CLEAR(CL) till

‚MOFF’ appears. Exit: TV/STANBY.

VR210/58

VCR

Without cassette. Press and hold SYSTEM till

‚MOFF’ appears. Press and hold CLEAR(CL) till

‚G591’ appears. Exit: TV/STANBY.

VR220/58

VCR

Press CHILD LOCK (key-simbol) on the RC for 5s with the VCR switched on.

VR220/58

VCR

Without cassette. Press and hold STOP on the

RC and then press STOP/EJECT on VCR. Select the line ‚MODULATOR’ on the TV screen or ‚MOD+’ in the display with P+/-. In the display select ‚OFF’ / ‚MOD-‚ (modulator off) with VOL-or ‚MOD+’ (modulator on). Confirm with OK. Exit with MENU

Manufacturer

Model

Chassis

Product

Mode

Enter

VR220/58

VCR

Without cassette. Hold the STOP button on the RC. In addition press the STOP/EJECT button

on the VCR until the pre-set modulator

frequency appears in the display, e.g. ‚M591’

(591MHz or 36 ch. UHF). Select line ‚OPTIMIZE

FREQUENCY’ using P+/-. Enter new

modulator frequency with the numbers 0-9. In

line ‚SOUND SYSTEM’ select the TV system

using VOL+/-. ‚G’ = PAL B/G. ‚K’ = SECAM D/K.

Confirm with OK. ‚STORED’ will appear briefly

on the screen.

VR220/58

VCR

Disconect from the mains power supply. Press and hold the STANDBY/ON button on the device

and reconnect to the mains power supply.

Release the button when ‚OSD’ appears in the

VCR display.

VR400/58

VCR

Press and hold STOP till [] appears.

VR400/58

VCR

Without cassette. Press and hold SYSTEM till

‚G591’ appears. Press and hold CLEAR(CL) till

‚MOFF’ appears. Exit: TV/STANBY.

VR400/58

VCR

Without cassette. Press and hold SYSTEM till

‚MOFF’ appears. Press and hold CLEAR(CL) till

‚G591’ appears. Exit: TV/STANBY.

VR400/58

VCR

Without cassette. VCR st-by. Press and hold

SYSTEM till ‚G591’ appears. System change:

SELECT. Freq. Change: P +/-. Store: OK.

Exit: TV/STANBY.

D-TV

C9003

CTV

Service Mode

On the local control press function key five times

(indication „Service” will appear), afterwards

within a sec. press key „MEN” on the remote

control. Store: X. Exit: TV.

CTV

Switch off set with main switch. Switch on set

with main switch and during doing this press

the buttons + and – of volume control on the

set’s control bord simultaneously until the

display lights. Display: SS? Press the button

‚S’ on the RC. Switch off with RC. Now the

combination lock is unlocked and one can

switch on again in the normal manner.

ICC9

CTV

Service Mode

Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED

switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again. (WARNING: scart must be free.)

T7032VT

TX92

CTV

Put TV into standby, then turn power off, then

turn power on whilst holding standby button on

remote and step through menus to `vol set` and

increase level to max.

28N8S

2B-F

CTV

Service Mode

Quick press: –\-, MENU, TV.

STEREO PLUS

CTV

Service Mode

MUTE –> OK (M) –> TV

Controls: cursor buttons. Store: OK (M).

Exit: TV

Manufacturer

Model

Chassis

Product

Mode

Enter

CB-20H1 CB-20S20

CB-21H1 CB-21P30

CB-21S20 CB-3373

CB-5020 CB-5073

CB-5079 CB-5320

CB-5373 CB-5379

S15A

CTV

Service Mode

STAND-BY –> DISPLAY –> P.STD –>

MUTE –> POWER ON.

Controls: VOL +/-, CH +/-. Exit: POWER OFF.

CK5038

SCT11B

CTV

Service Mode

STAND-BY –> P.STD –> HELP –> SLEEP –>

POWER ON.

Controls: VOL +/-, CH +/-. Exit: STATUS.

CX5944 CX6844

SCT12B

CTV

Service Mode

STAND-BY –> P.STD –> HELP –> SLEEP –>

POWER ON.

FACTORY MODE: set PSL=15 and PVA=63.

Controls: VOL +/-, CH +/-. Exit: STATUS

CB-14V20 CB-5073

CB-20P30 CB-5079

CB-20S10 CB-5373

CB-20S20

CB-21P30

CB-21S10

CB-21S20

SCT13B

CTV

Service Mode

STAND-BY –> P.STD –> HELP –> SLEEP –>

POWER ON.

Controls: VOL +/-, CH +/-. Exit: STATUS.

CS7272

SCT51A

CTV

Service Mode

PICTURE OFF –> SLEEP –> P.STD –> MUTE –> PICTURE ON

SCT52A

CTV

Service Mode

PICTURE OFF –> SLEEP –> P.STD –> MUTE –> PICTURE ON

CTV/VCR

Service Mode

STAND-BY –> P.STD –> MENU –> SLEEP –> POWER ON

DTV 1

CTV

Service Mode

Simultaneous press Service-button on digi-bord & button C on RC. Selection: Bass +/-. Adjust: Volume +/-. Store: T. Exit: TV.

DTV 100

CTV

Service Mode

Simultaneous press red & blue buttons on RC

then (in 5 sec.) simultaneous press P- & P+

on local keyboard. Commands: arrows. Store:

OK. Exit: TV.

DTV 2

CTV

Service Mode

Like DTV 1 or simultaneous press Service-button (down right on RC) & C button on RC. Selection: Bass +/-. Adjust: Volume +/-. Store: IDEAL. Exit: TV.

DTV 3

CTV

Service Mode

Simultaneous press red & blue buttons on RC

then (in 5 sec.) simultaneous press P- & VOL+ on local keyboard. Selection: wheel. Adjust: ring. Store: red button. Exit: OFF.

TV 4

CTV

Service Mode

Simultaneous press red & blue buttons on RC

then (in 5 sec.) simultaneous press P- &

VOL+ on local keyboard. Selection: P +/-.

Adjust: VOL +/-. Store: auto. Exit: OFF.

STV7128

TV 8

CTV

Service Mode

Simultaneous press red & blue buttons on RC

then (in 5 sec.) simultaneous press P- &

VOL+ on local keyboard. Selection: P +/-.

Adjust: VOL +/-. Store: auto. Exit: OFF.

TV 9

CTV

Service Mode

Simultaneous press red & blue buttons on RC

then (in 5 sec.) simultaneous press P- &

VOL+ on local keyboard. Selection: P +/-.

Adjust: VOL +/-. Store: auto. Exit: OFF.

STV355FST

CTV

Service Mode

MENU –> SERVICE –> OK –> 089

Manufacturer

Model

Chassis

Product

Mode

Enter

11AK18

CTV

Service Mode

MENU 1 6 7 5

11AK19

CTV

Service Mode

MENU 4 7 2 5

STEREO PLUS

CTV

Service Mode

MUTE –> OK (M) –> TV

Controls: cursor buttons. Store: OK (M).

Exit: TV

4BSA

CTV

Service Mode

Short conntacts 2 & 6 on bord TB connector

and press button ‚MODE’ on RC. Remove short.

Store: auto. Exit: ‚MODE’.

63CS-03S

CS

CTV

Service Mode

Press and hold buttons VOL- and PR+ on the

local keyboard and then switch on with main

switch. Store: ‚POWER’.

D3000

CTV

Service Mode

Press Service-button on Digi-modul. Store: on/off. Exit: Service button.

Euro-DS1

CTV

Service Mode

Short conntacts 2 & 6 on Digi Modul Service Slot and then press button ‚MODE’ on RC.

Store: (romb-symbol) on RC. Exit: standby, switch off, switch on, remove short.

54AT-15SC

CTV

Service Mode

Press and hold buttons VOL- and PR+ on the

local keyboard and then switch on with main

switch. Store: ‚POWER’.

DV-5401S

CTV

Service Mode

Locate place for 2 buttons on local keyboard

(main board) S754-MODE and S755-PRESET.

Enter: short S754 (-SERV-). Commands:

CH +/-. Store: short S755.

FS369M4

CS9409

CTV

Service Mode

Info Center’ –> ‚Special Functions’ –> ‚Service’ –> Code Number 089

SAT

Unlock: Press key-symbol and 6 1 0 1.

STV355FST

CTV

Service Mode

MENU –> SERVICE –> OK –> 089

AE-2

CTV

Service Mode

Turn on the main power switch of the set while pressing any two buttons on the front panel.

‚TT’ will appear on the upper right corner of the screen. Press the ‚MENU’ button on the RC.

In menu select ‚DEMO’ and press ‚OK’. Select

DEVICE coresponding to the adjustment you

need. Store: OK. Exit: turn off.

BE4

CTV

Service Mode

? –> 5 –> VOL+ –> TV –> MENU Exit: 00

KV-B2911

CTV

Service Mode

Turn on the main power switch of the set while pressing any two buttons on the front panel.

‚TT’ will appear on the upper right corner of the screen. Press the ‚MENU’ button on the RC.

In menu select ‚DEMO’ and press ‚OK’. Select

DEVICE coresponding to the adjustment you

need. Store: OK. Exit: turn off.

KV-G21M1

CTV

Service Mode

Switch TV to STANDBY. DISPLAY –> 5 –> VOL+ –> POWER

ICC9

CTV

Service Mode

Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED

switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again. (WARNING: scart must be free.)

STEREO PLUS

CTV

Service Mode

MUTE –> OK (M) –> TV

Controls: cursor buttons. Store: OK (M).

Exit: TV

Manufacturer

Model

Chassis

Product

Mode

Enter

Telefunken

TX-90

CTV

Service Mode

Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED

switch off. Simultaneous press VT button on RC

and switch on TV with main switch. Press VT

button again.

Telefunken

TX-91

CTV

Service Mode

Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED

switch off. Simultaneous press VT button on RC

and switch on TV with main switch. Press VT

button again.

Thomson

ICC19

CTV

Service Mode

Switch to Standby. Switch off with the mains

switch. Press and hold blue button and then

switch on with the mains switch. Press blue

button again. Exit: switch off with mains switch.

Thomson

ICC19

CTV

Service Mode

Switch to Standby. Switch off with the mains

switch. Press and hold ‚PROG-‚ and ‚VOL-‚ and

then switch on with the mains switch. Exit:

switch off with mains switch.

Thomson

ICC9

CTV

Service Mode

Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED

switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again. (WARNING: scart must be free.)

Thomson

TX-90

CTV

Service Mode

Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED

switch off. Simultaneous press VT button on RC

and switch on TV with main switch. Press VT

button again.

Thomson

TX-91

CTV

Service Mode

Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED

switch off. Simultaneous press VT button on RC

and switch on TV with main switch. Press VT

button again.

Toshiba

2150

S5E

CTV

Service Mode

Press ‚MUTE’ button. Press and hold ‚MUTE’

button and press ‚MENU’ on local keyboard.

Select: PR nr.. Adjust: VOL+/-. Store: auto.

Exit: ‚STANDBY’. Test picture: ‚AV’.

Toshiba

2876DD 2988DG

CTV

Service Mode

Press ‚MUTE’ button. Press and hold ‚MUTE’

button and press ‚MENU’ on local keyboard.

Select: PR+/-. Adjust: VOL+/-. Store: auto.

Exit: ‚STANDBY’. Test picture: ‚AV’.

Universum

6000

CTV

Service Mode

Switch on with main switch. Press ‚MENU’,

‚TV’, ‚i’. If TV is still in st-by press 2x’TV’, ‚i’.

Select and adjust with cursors. Store: ‚OK’.

Exit: switch off with main switch.